Panasonic KX-TCD410SLS Service Manual page 9

- To exit the operation, press
For Service Hint:
* : If the current 4-digit PIN is forgotten, press
be able to enter new PIN.
6.3.3. Reset Base Unit PIN to Default (0000) -When There is NO Handset
Registered-
6.3.3.1. Symptom
There is no way to reset base PIN when there is no handset registered to the base.
6.3.3.2. Thinkable Situation
- Customer may ask to reset base PIN because they forget it.
- Customer may bring only a base unit for repair and there is no
handset registered to the base (Need to register another handset
to the base to confirm if the unit works properly after repair).
- When original handset has broken and customer purchased a new
one, if customer forget base PIN, customer cannot register the
new handset and may ask to reset the PIN.
6.3.3.3. Remedy
<Preparation>
Refer to JIGs and PC
<Connection>
().
any time.
9
and you will