Panasonic KX-TCD410SLS Service Manual page 47

Items
(I)* Transmitted
Power
Confirmation
(J) Modulatoin
Check and
Adjusment
(K) Frequency Offset
Confirmation
Adjustment
Point
TP15 Remove the Antenna before starting step from 1 to 5.
1. Configure the DECT tester(CMD60) as follows;
<Setting>
-Test mode: PP
-RFPI: 0102030405
-Traffic Channel: 5
-Traffic Slot: 4
-Mode: Loopback
2. Execute the command "testmode".
3. Execute the command "regcmd60"
4. Initiate connection from DECT tester.
5. Confirm that the NTP value at A201 (TP15) is 20dBm ~ 25dBm
TP15 Follow steps 1 to 4 of (I) above.
5. Confirm that the B-Field Modulation is 340kHz/div ~ 402kHz/
div using data type Fig31.
6. Adjust the B-Field Modulation if required. (Execute the
command "Readmod" and "Writemod xx", where xx is the
value.)
- Follow steps 1 to 4 of (I) above.
5. Confirm that the frequency offset is < ± 40kHz.
Procedure*
47
Check
IC1,IC3,C54
C66,C60,L3
C57,C55,C5
C62,R23,R2
C63,C64,C6
IC1,IC3,C54
C66,C60,L3
C57,C55,C5
C62,R23,R2
C63,C64,C6
IC1,IC3,C54
C66,C60,L3
C57,C55,C5
C62,R23,R2
C63,C64,C6