Panasonic KX-TCD410SLS Service Manual page 44

14.2. Adjustment Standard (Base Unit)
When connecting the Simulator Equipments for checking, please refer to below.
14.2.1. Component View
Note:
(H) -(O) is refered to ADJUSTMENTS (BASE UNIT)
14.2.2. Flow Solder Side View
Note:
(A) - (P) is refered to
15. ADJUSTMENTS (HANDSET)
If your unit have below symptoms, adjust or confirm each item using remedy column from the
table.
The movement of Battery Low indicator is wrong.
The handset does not respond to a call from base unit.
The handset does not transmit or the transmit frequency is off.
The transmit frequency is off.
The transmit power output is low, and the operating distance between
base unit and handset is less than normal.
The reception sensitivity of base unit is low with noise.
Does not link between base unit and handset.
The reception level is high or low.
The transmit level is high or low.
* : Refer to Adjustment
15.1. Adjustment
Please follow the items below when BBIC or EEPROM are replaced.
ADJUSTMENTS (BASE UNIT)
Symptom
()
()
()
44
Remedy
Make confirmation in item
(F)~(G)
Make adjustments in item
(H), (J)~(N)
Make adjustments in item
(H)~(K), (M)
Make confirmation in item
(H)~(K), (M)
Make confirmation in item
Make confirmation in item
Make confirmation in item
(H)~(N)
Make adjustments in item
Make adjustments in item