Mitsubishi Electric FATEC FR-A800 Manual page 37

2
UNDERSTANDING INVERTER SYSTEM
・Sampling item list
For details on the monitor items, refer to the Instruction Manual (Detailed) of the inverter.
For sampling items of the digital data, refer to the Instruction Manual (Detailed) of the inverter.
High speed sampling is applicable to the items whose name contains an asterisk (  ) at the
beginning. For details on the monitor items, refer to the Instruction Manual (Detailed) of the
inverter.
Sampling
Model name
mode
Monitor/High
speed
FR-A800
High speed
• When changing the sampling setting mode (monitor/high speed), change the sampling
items before setting. Because the monitor contents change if the mode is changed,
unshared sampling items are cleared. (Refer to (2) in this section)
• When setting the sampling items, the analog data (CH1 to CH4) is required to set from
CH1, the digital data (CH5 to CH8) is required to set from CH5 in order.
2.6 Inverter setup software
32
Output frequency, Output current, Output voltage, Frequency setting value, Speed/machine speed,
Motor Torque, Converter output voltage, Regenerative brake duty, Electronic thermal O/L relay function
load factor, Output current peak value, Converter output voltage peak value, Input power, Output power,
Load meter, Motor excitation current, Position pulse, Cumulative energization time, Orientation status,
Actual operation time, Motor load factor, Torque command, Torque current command, Motor output,
Feedback pulse, PLC function user monitor 1, PLC function user monitor 2, PLC function user monitor 3,
PID set point, PID measured value, PID deviation, Motor thermal load factor, Inverter thermal load factor,
PTC thermistor resistance, PID measured value 2, Remote output value 1, Remote output value 2,
Remote output value 3, Remote output value 4, PID manipulated amount, Second PID set point,
Second PID measured value, Second PID deviation, Second PID measured value 2, Second PID
manipulated amount, Dancer main speed setting, Control circuit temperature
Output frequency, U-phase output current, V-phase output current, W-phase output current,
Converter output voltage, Output current (all three phases), Excitation current (A), Torque current (A),
Terminal 2, Terminal 4, Terminal 1, Excitation current (%), Torque current (%), Position command,
Current position, Droop pulse, Output frequency (with sign), Motor rotations per minute,
Speed command, Torque command, Motor torque, Excitation current command,
Torque current command
Sampling item