Mitsubishi Electric FATEC FR-A800 Manual page 35

2
UNDERSTANDING INVERTER SYSTEM
(2) Sampling settings
Select the [Setting] tab in the property window to display the sampling settings column. The time,
trigger, station, and waveform of the analog CH can be set as analog data, and that of the digital
CH can be set as digital data.
Symbol Name
A Initialize
B Mode
C Time
D Trigger
E Station
F Wave
G Help area
Show/hide switching
H
button
I Close
2.6 Inverter setup software
30
A
B
C
D
E
F
G
Initializes the sampling settings.
Sets the measurement mode for sampling.
Mask count Sets the interval for data sampling measurement.
Measurement Displays the maximum time for data sampling measurement. For the details, refer to
time (ms) page 31.
Used to set the start conditions of the sampling measurement. For the details, refer to page 33.
Used to select the station to be set for sampling.
Used to select the items to be sampled. For analog data, 4 CHs (8 CHs of trace data) can be selected,
and for digital data, 4 CHs (8 CHs of trace data) can be selected.
For the sampling items, refer to page 32.
Shows a description of the currently selected item.
Shows/hides the property window by pressing this button.
Closes the currently-selected tab ([Setting], [Indication], or [Cursor]) of the property window. The closed
tab can be opened again from [Property window] in [Graph (Z)] of the menu bar.
H I
Function and description