Mitsubishi Electric FATEC FR-A800 Manual page 151

9
REPLACEMENT PROCEDURE
(10) Click [Batch Write] to write the parameters on the FR-A800.
(11) Turn OFF the personal computer, and then turn OFF the inverter. (Note that some parameter
setting values reflect the inverter after turning off or resetting the inverter.)
Mount the operation panel.
(12) If the setting values of E400 (Pr.77), D000 (Pr.79) are changed in step (8), turn ON the inverter
and set the values of E400 (Pr.77), D000 (Pr.79) written down earlier, and then turn OFF the
inverter.
[Precautions for converting]
There are adjustment parameters and parameters which cannot be converted. Read the instruction
manual of FR Configurator2 [SW1DND-FRC2-E] carefully before converting parameters.
9.2 Setting the parameter
146