Cornwell Tools CSE-VS300 Operating Manual

• Operating Manual
• Warning Information
• Parts List
THIS OPERATING
MANUAL CONTAINS
IMPORTANT SAFETY
INFORMATION.
READ CAREFULLY
AND UNDERSTAND
ALL INFORMATION
BEFORE OPERATING
THIS TOOL.
SAVE THIS MANUAL
FOR FUTURE USE.
DO NOT OVERLOAD STAND. OVERLOADING CAN CAUSE DAMAGE TO, OR
FAILURE OF, THE STAND.
PLACE LOAD IN THE CENTER OF THE SADDLE ONLY.
USE STANDS IN PAIRS, ON HARD, LEVEL SURFACES CAPABLE OF SUSTAINING
THE LOAD.
LOAD AND STANDS SHALL BE STABLE. USE ON OTHER THAN HARD, LEVEL
SURFACES MAY RESULT IN POSSIBLE LOSS OF LOAD.
INSPECT EACH STAND TO BE SURE IT IS IN GOOD CONDITION BEFORE USE.
NO ALTERATIONS TO THE STAND SHALL BE MADE.
CSE-VS300/CSE-VS600
Meets or exceeds ASME PALD-1997
standards for performance & safety.
Vehicle Stand
Vehicle Stand
USE SUPPORT POINTS SPECIFIED BY VEHICLE MANUFACTURER.
DO NOT CRAWL UNDER VEHICLE WHEN PLACING/REMOVING STANDS.
ENSURE BOTH STANDS ARE SET AT SAME HEIGHT AND HOLDING DOGS ARE
FULLY ENGAGED.
READ, STUDY & UNDERSTAND THE OPERATING MANUAL PACKED WITH THIS
STAND BEFORE USING STAND. FAILURE TO HEED THESE WARNINGS MAY
RESULT IN LOSS OF LOAD, DAMAGE TO STAND, AND/OR FAILURE RESULTING
IN PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
1
CSE-VS300
3 Ton
CSE-VS600
6 Ton
Rev. 1/29/02