Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Balcrank LION HP 1151-022
Summary of Contents for Balcrank LION HP 1151-022
- Page 1 SERVICE BULLETIN SB1084 Revison B 11/14 ® LION HP STUB PUMP ® BULK GREASE DISPENSING OUTFIT MODEL #1151-022 Thoroughly read and understand this manual before installing, operating or servicing this equipment. OPERATION, INSTALLATION, MAINTENANCE AND REPAIR GUIDE...
- Page 2 General Safety WARNING Thoroughly read and understand this manual and the pump manual before installing, operating or servicing the described products. The Lion HP 50:1 pump (1150-018) develops ® 7500 psi (517 Bar) maximum working pressure CAUTION: Always read and follow grease at 150 psi (10.3 Bar) maximum inlet air pressure manufacturers' recommendations regarding and stall conditions.
- Page 3 Part Parts List Item Decription Number LION HP Stub Pump Outfit ® 1150-018 Pump, Lion HP, Tote Stub Model #1151-022 832161 Coupler 832162 Seal, Coupler 805824 Screw, 3/8-16 x 1” 3260-036 F/R, Autodrain, 1/2” 3230-004 Ball Valve, 1/2” 3270-043 Hex Nipple, 1/2”, NPT 832258 Side Support Assembly Figure 3...
- Page 4 For Warranty Information Visit www.balcrank.com Revision Log: Balcrank Corporation ® Weaverville, NC 28787 Rev. A - Release 800-747-5300 Rev. B - Corrected part number for item 5 on page 3 and 800-763-0840 Fax updated warranty information www.balcrank.com SERVICE BULLETIN SB1084...
Need help?
Do you have a question about the LION HP 1151-022 and is the answer not in the manual?
Questions and answers