Lowering The Hopper Without Power - Toro 68141 Operator's Manual

Removing Debris from the Machine (continued)
5. Wipe away debris from the air cleaner.
6. Clean any debris buildup on the engine and in the transmission with a brush or blower.
Blow out dirt rather than wash it out. If you use water, keep it away from electrical
parts and hydraulic valves. Do not use a high-pressure washer. High-pressure
washing can damage the electrical system and hydraulic valves or deplete grease.

Lowering the Hopper without Power

1. Install the cylinder lock.
2. Ensure that the tub is empty.
3. Place a large drain pan under the hydraulic-
manifold block.
4. Remove the access panel.
3451-708A
IMPORTANT
G384891
G384893
Page 4–9 Operation: After Operation