Tamper Evident Labels - Belkin F1DN108KVM-UN-4 User Manual

oVerVIew oVerVIew
SECTIONS
Table of Contents

Tamper evident labels

Belkin Secure Switch uses holographic tamper evident labels to
provide visual indications in case of enclosure intrusion attempt.
If for any reason the tamper evident seal is missing, appears
disrupted, or looks different than the example shown here, please
avoid using the product and call Belkin Technical Support at:
(800) 282-2355.
active anti-Tampering system
Belkin Secure Switch is equipped with an always-on active
anti-tampering system. If mechanical intrusion is detected
by this system, the Switch will be permanently disabled and
LED will blink continuously.
If product indication tampered state (all LEDs blinking) - please call Technical
Support and avoid using that product
Product enclosure warning label
Belkin Secure Switch has the following warning printed
next to the location of the product Asset Tag and
Tamper Evident labels on product enclosure:
Belkin Belkin Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch
® ®
1 2 3
12345678
5
4 5 6 7
baCK To Table of ConTenTs > baCK To Table of ConTenTs >