Selecting A Computer Using Port Selectors - Belkin F1DN108KVM-UN-4 User Manual

oPeraTInG THe KVM swITCH oPeraTInG THe KVM swITCH
SECTIONS
Table of Contents

selecting a Computer Using Port selectors

Now that you have connected your console and computers to the Switch, it is
ready for use. You can select which computer you wish to control by pressing
the corresponding port selector on the front of the Switch. The LED number will
illuminate to indicate which computer (or port) is currently selected. Keyboard and
mouse inputs can only be sent to the selected computer, and video outputs can only
be received from the selected computer. The Switch also prevents any data transfer
between connected computers, ensuring the security of your computers.
Please note that the default port at power-up is port 1. In case of a power failure or
if the power is cycled, the Switch will default to port 1.
Belkin Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch
®
1 2 3
20
4 5 6 7
baCK To Table of ConTenTs > baCK To Table of ConTenTs >