Snmp Agent - NetModule NB3720 User Manual

NB3720
User Manual for NRSW version 4.4
SNMP Configuration
HOME INTERFACES
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server
NTP Server
Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server

SNMP Agent

Web Server
Softflow
Discovery
Redundancy
Voice Gateway
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
The following parameters can be used to configure the SNMP agent:
Parameter
Administrative status
Operation mode
Contact
Location
Listening Port
Once the SNMP agent is enabled, SNMP traps can be generated using SDK scripts.
ROUTING FIREWALL VPN SERVICES
Configuration Authentication
SNMP Agent Configuration
Administrative status:
Operation mode:
Contact:
Location:
Listening port:
Apply
Figure 5.46.: SNMP Agent
SNMP Configuration
Enable or disable the SNMP agent
Specifies if agent should run in compatibilty mode or for SNMPv3 only
System maintainer or other contact information
Location of the device
SNMP agent port
143
SYSTEM
enabled
disabled
v1 | v2c | v3 v3 only
161
LOGOUT
Download
MIB