NB3720
User Manual for NRSW version 4.4
5.7.15. Voice Gateway
Depending on your hardware, you can set up a voice gateway on the router which can be used to
connect mobile calls to VoIP clients and vice versa.
Administration
HOME
INTERFACES
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server
NTP Server
Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server
SNMP Agent
Web Server
MQTT Broker
Softflow
Discovery
Redundancy
Voice Gateway
NB2800 NetModule Router Simulator
Hostname NB1800
Software Version 4.4.0.104
© 2004-2020, NetModule AG
The following parameters can be used to set it up:
Parameter
Administrative status
Call routing
SIP status
ROUTING
FIREWALL
VPN
SERVICES
Administration
Endpoints
Administration
Administrative status:
Call Routing:
SIP Settings
SIP status:
SIP interface:
SIP port:
SIP register expires:
Apply
Figure 5.49.: Voice Gateway Administration
Voice Gateway Administration Settings
Specifies whether the gateway shall be enabled or disabled
Defines who will be responsible for call routing. If SDK has been spec-
ified you would need to install a script (see examples) which will be
responsible for routing and accepting the calls. Otherwise the static
routing configuration will be used.
Specifies whether the SIP agent will be enabled or disabled
152
SYSTEM
Routing
enabled
disabled
Generic
enabled
disabled
LAN1
5060
150
seconds
LOGOUT
Need help?
Do you have a question about the NB3720 and is the answer not in the manual?
Questions and answers