NetModule NB3720 User Manual page 201

NB3720
User Manual for NRSW version 4.4
Event
remote-mail.are
scan-mobile.are
scan-wlan.are
send-mail.are
send-sms.are
send-techsupport.are
serial-read.are
serial-readwrite.are
serial-tcp-broadcast.are
serial-tcsetattr.are
serial-udp-server.are
serial-write.are
set-ipsec-route.are
sms-confirm.are
sms-control.are
sms-delete-inbox.are
sms-read-inbox.are
sms-to-email.are
sms-to-serial.are
snmp-agent.are
snmp-cmd.are
snmp-trap.are
status.are
syslog.are
tcpclient.are
tcpserver.are
techsupport.are
Description
This script reads and sends mails from a remote IMAP/POP3/SMTP
server
This script can be used to switch the Mobile LAI according to available
networks
This script can be used to switch the WLAN client network according
to availability
This script will send an E-Mail to the specified address.
This script will send an SMS to the specified phone number.
This script will generate a techsupport and send it to the specified
E-Mail address.
This script can be used to read messages from the serial port.
This script will write to and read from the serial port.
This script reads messages coming from the serial port and forwards
them via TCP to remote hosts (and vice versa).
This script can be used to set/get the attributes of the serial port.
This script reads messages coming from the serial port and forwards
them via UDP to a remote host (and vice versa).
This script can be used to write a message to the serial port.
set route to IPSEC server depending on active WWAN / WLAN net-
work
This script will send out a message and confirm its delivery.
This script will execute commands received by SMS.
This script can be used to flush the SMS inbox.
This script can be used to read the SMS inbox.
This script will forward incoming SMS messages to a given E-mail
address.
This script can be used to write a received SMS to the serial port.
This script extends MIB entries of the SNMP agent
This script issues SNMP set/get commands
This script can be used to send SNMP traps
This script can be used to display all status variables
Throw a simple syslog message.
This script sends a message to a TCP server.
This script implements a TCP server which is able to receive mes-
sages.
This transfers a techsupport to a remote FTP server
201