Setting Up As A Real-Time Base - Leica Viva GNSS Getting Started Manual

Viva GNSS, Equipment
1.3
Use
Description


Setting up as a Real-Time Base

The equipment setups described following are to be used for real-time base stations
with the need of normal radio coverage. Raw observation data can also be collected
for post-processing.
The GS10 instrument clips to the tripod leg. Connections are made to the GNSS and
radio antenna. The radio antenna is mounted on the antenna arm which clips to the
GNSS antenna. The GS10/GS15 instrument can be programmed with the CS field
controller before use which can then be omitted from the setup.
The GS10 instrument can be used as a DGPS base station, if fitted with the DGPS
option, and as a real-time base station.
The connection between GS15 and CS field controller is made via Bluetooth.
• GNSS antenna/GS15 instrument is mounted directly using screw fitting. If using
stub and adapter, procedures can vary slightly.
• When using the adapter and carrier, ensure that the GNSS antenna and the
adapter assembly slide down the full length of the carrier stub. An incorrectly
mounted GNSS antenna will have a direct effect on the results.
16