Manual Dimming Control - Elation KL FRESNEL 4 User Manual

M A N U A L D I M M I N G C O N T R O L
FEATURE IS DISABLED WHEN DMX INPUT CABLE IS CONNECTED TO FIXTURE! TO
USE MANUAL DIMMING KNOB, DISCONNECT DMX CABLE IF CONNECTED.
Follow steps below to enable manual DIMMING control knob.
1. Access fixture system menu navigating to Test menu then access ManCtrl sub menu.
TEST
NOTE: To access the LCD Menu Control Display when locked/OFF, press and hold the
MODE button for 3 seconds.
2. Select the Stobe menu, and set to value of 255 (LED ON). Exit fixture system menu.
3. Push DIMMING knob to unlock, rotate to desired level, and push knob again to lock. Repeat
this process each time a dimmer adjustment is desired.
LCD DISPLAY
DMX CABLE CONNECTED
Additionally, the user can press and hold the encoder knob for 10 seconds to activate full
output for 1 minute. This feature can be used to aid in aiming and/or positioning the fixture,
and overrides any DMX-controlled operations.
Dimmer
Man Ctrl
Strobe
Manual Control Functions
NO DMX CABLE CONNECTED
21