Control Panel - Elation TVL2000 User Instructions

TVL2000
5-Pin XLR DMX Connectors.
connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures
may be implemented in a 3-pin XLR DMX line. When inserting stan-
dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
3-Pin XLR to 5-Pin XLR Conversion
Conductor 3-Pin XLR Female (Out)
Ground/Shield
Data Compliment (- signal)
Data True (+ signal)
Not Used
Not Used
©Elation Pr fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 7
o
Some manufactures use 5-pin XLR
5-Pin XLR Male (In)
Pin 1 Pin 1
Pin 2 Pin 2
Pin 3 Pin 3
Pin 4 - Do Not Use
Pin 5 - Do Not Use
Set Up TVL2000
1 Display: Shows the various menus and the selected functions
2 Indicator LED:
DMX
MASTER
SLAVE
COLOR TEMP.
3 Button:
MENU
DOWN
UP
ENTER
4 Color Temperature Adjustment: Adjust the color temperature from 3200k to 6500k, 25K
5 Dimmer Adjust knob: Adjust the intensity of the unit.
6 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
7 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
8 Mains output: Connect to supply main power for the next unit.
©Elation Pr fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 8
o
On DMX input present
On Master Mode
On Slave Mode
On Max. power consumption of CW/WW
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
as a step. When the value is between 4825K and 4875K the green
LED indicator will light . It means the power consumption of
CW/WW color has reached the maximum.

Control Panel