Wiring; Pin Assignment - Siemens SIMATIC ET 200SP Manual

Wiring

3.1

Pin assignment

Definition
Each interface module has its own 24 V connection.
24 V DC supply voltage
The following table shows the signal names and the descriptions of the pin assignment of
the 24 V DC supply voltage.
Table 3- 1
1)
2)
Note
Pin assignment BusAdapter
You can find information on pin assignment of the BusAdapter under:
PROFINET IO BusAdapter (https://support.industry.siemens.com/cs/ww/en/view/109773801)
Reference
You can find more information on accessories and how to connect the interface module in
the Distributed I/O system ET 200SP
(https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
Interface Module IM 155-6 PN R1 (6ES7155-6AU00-0HM0)
Equipment Manual, 11/2022, A5E51160307-AA
Pin assignment 24 V DC supply voltage
View
Connector IM
connecti
on
1L+ and 2L+ as well as 1M and 2M are bridged internally
Maximum 10 A permitted
Signal name
1)
1L+ 24 V DC
2L+ 24 V DC (for looping through)
1M Ground
2M Ground (for looping through)
3
Description
2
2
27