Eclipse RatioAir RA Series Manual page 2

PYRIGHT

worldwide. This publication is protected by federal regulation

and shall not be copied, distributed, transmitted, transcribed

or translated into any human or computer language, in any

form or by any means, to any third parties, without the

express written consent of Eclipse, Inc., Rockford, Illinois,

U.S.A.

We reserve the right to change the construction and/or

TICE

configuration of our products at any time without being

SCLA MER N

obliged to adjust earlier supplies accordingly.

The material in this manual is believed adequate for the

intended use of the product. If the product, or its individual

modules or procedures, are used for purposes other than

those specified herein, confirmation of their validity and

suitability must be obtained. Eclipse, Inc. warrants that the

material itself does not infringe any United States patents. No

further warranty is expressed or implied.

We have made every effort to make this manual as accurate

and complete as possible. Should you find errors or

omissions, please bring them to our attention so that we may

correct them. In this way we hope to improve our product

documentation for the benefit of our customers. Please send

your corrections and comments to our Documentation

Manager.

It must be understood that Eclipse’ s liability for its products,

whether due to breach of warranty, negligence, strict liability,

or otherwise, is limited to the furnishing of such replacement

parts and Eclipse, Inc. will not be liable for any other injury,

AB L TY

loss, damage or expenses, whether direct or consequential,

RR NTY

including but not limited to loss of use, income of or damage

to material arising in connection with the sale, installation, use

of, inability to use or the repair or replacement of Eclipse’ s

products.

Any operation expressly prohibited in this Guide, any

adjustment, or assembly procedures not recommended or

authorized in these instructions shall void the warranty.

clipse RatioAir v1 - Design Guide No. 115, 2/14/05