Warranty - Physipro TWO-POINT PADDED POSITIONING BELT Owner's Manual

WARRANTY

The warranty period for the parts and components of the two-point padded positioning
belt with is 12 months.
This limited warranty covers defects in material and workmanship on all the
standard or optional parts and components of this product, from the date of
shipment, for the duration stated above.
Parts and components that are replaced or repaired under one of these warranties
will remain subject to the warranty for the remainder of the warranty period. Physipro
Inc. agrees to repair or replace, free of charge, any defective part or component
for the full duration of the warranty period.
This warranty does not apply to:
a) Products that were misused, neglected or have not been maintained and stored in
accordance with the recommendations of the manufacturer.
b) Products that were intentionally or accidentally altered, or products that have been
damaged through repairs or modifications made without the prior written consent of
Physipro Inc. or of an authorized retailer.
c) Normal wear and tear or damages caused by the user such as punctures, tears, or burns.
Warranty service
If a defect is detected during the warranty period, please contact the retailer from whom you
purchased your Physipro Inc. product as soon possible. Please refrain from using your product
until an inspection has been made by a qualified technician.
In the event you do not receive satisfactory warranty service, please write directly to Physipro
Inc. at the address listed below or send us an e-mail at order@physipro.com, please include
the retailer's name and address, a brief description of the defect, the invoice date, and the
products serial number, if applicable. DO NOT RETURN product prior to receiving a written
return authorization from Physipro Inc.
The defective unit or parts must be returned for warranty inspection within thirty (30) days of
the return authorization date at the following address:
370, 10th Avenue South, Sherbrooke, Quebec, J1G 2R7
Exclusions and limitations
Compliance with the safety precautions and recommendations mentioned in this manual is
crucial to avoid injury to the user or other persons. Inadequate or inappropriate adjustments
will increase the risk of accident. It is important to thoroughly read the manual before making
any adjustments. Physipro Inc. will not be held responsible for bodily injury or property
damage caused by misuse or incorrect adjustments made to its product by an unqualified
person.
Physipro Inc. disclaims all liability for damages that occur during transportation or are the
result of situations beyond its control.
The foregoing warranty is exclusive and in lieu of all other expressed warranties.
Two-Point Padded Positioning Belt
Physipro Inc.
6