Port And Modem Installation - Multitech MultiModem ISI9234PCIe-4 User Manual

Port and Modem Installation

Immediately after the ISI Card driver installation is complete, another set of installation wizard screens will appear.
With this installation wizard, you will install ISI ports and modems into the computer's operating system and then
associate the modem with the ports.
This installation sequence occurs very rapidly and is repetitive. The installation wizard may appear to be
"stuck" in an endless loop, but that is not the case. For the ISI-4, the installation wizard must install four ports and
four modems, and must make four modem/port associations. Similarly, for the ISI-8, the installation wizard must install
eight ports and eight modems, and must make eight modem/port associations.
Each port and each modem entails a separate wizard screen sequence.
Port Installation.
This is the beginning of a sequence of screens that will be repeated for each port to be installed.
Respond to the wizard screens as follows:
1. The Found New Hardware – Multifunction Device screen appears.
Click on I don't have the disc. Show me other options.
2. The User Account Control – Windows needs your permission to continue screen appears. Click Continue.
MultiModem ISI Server Cards User Guide
Downloaded from Elcodis.com electronic components distributor
Chapter 3 – Software Installation
37