CONTENTS 1 Description ..............................1.1 Models ............................... 1.2 Tank Protection ..........................1.3 Thermal Insulation ..........................1.4 Connection points on the tank ......................1.5 Packaging............................2 General Information ............................3 Dimensions and Other Technical Data ......................4 Operation................................ 5 Typical Layout Example with Thermal Store ....................6 Installation and Commissioning ........................
Page 3
3 - Dimensions and Other Technical Data ØDe ØDi │...
4 - Operation In a thermal store, heating water can be heated up by various types of hot-water boilers, or possibly also by electric heating elements. The thermal store is connected to the energy source using a G 6/4“ connection fitting. The individual tank outlets are fitted according to the circuits to be connected.
6 - Installation and Commissioning Installation shall meet valid rules and may be done by qualified staff only. Defects caused by improper installation, use or handling are not covered by warranty. After the tank is installed and connected to an existing heating system, it is recommended to clean the entire heating system using a suitable cleaning agent, e.g.
Page 7
Warranty on insulation The insulation is covered by a 24-month warranty. This period starts the next day after the insulation is sold. □ Warranty shall become null and void if: ○ the procedure described in the Installation Manual was not respected, ○...
Need help?
Do you have a question about the PS E+ and is the answer not in the manual?
Questions and answers