Fujitsu AUYG18LVLB Design & Technical Manual page 280

¢ UTY-RVNYM
 Function setting procedure
1. Connect the power supply of the outdoor unit.
2. Switch to the function setting mode.
When [Menu button] is pressed twice while "Monitor" screen is displayed, it switches to the
"Submenu" screen. If [Menu button] is pressed while the "Submenu" screen is displayed, the
display returns to the "Monitor" screen.
Press the [Screen switch button (Left)] and [Screen switch button (Right)] simultaneously for 5
seconds to switch to "Service" screen.
Select [Function setting] with pressing the [Cursor button (Up/Down)], and press the [Enter but-
ton].
8-3. Indoor unit (setting by wired remote controller)
Monitor
Mo 10:00 AM
O f f
Menu
Submenu 1/2
[ ] Mo 10:00AM
Date and time
Screen
Filter sign
R.C. sensor control Off
Room temp. display Off
Back:
Setting:
Monitor
Service Mo 10:00AM
Test run
Function setting
Error history
I.U.address verification
Version
Back: Setting:
- 272 -
Submenu
[ 1/2 ] Mo 10:00AM
Date and time
Screen
Filter sign
R.C. sensor control
Room temp. display
Back:
Setting:
Monitor
Service
Mo 10:00AM
Test run
Function setting
Error history
I.U.address verification
Version
Back: Setting:
Function setting
Mo 10:00AM
R.C. Function Setting
address No. No.
00 00 00
Cancel: OK:
Version Error history
Off
Off
8. Function settings