Fujitsu AUYG18LVLB Design & Technical Manual page 272

 Function setting procedure
1. Connect the power supply of the outdoor unit.
2. To enter the function setting mode, while holding down the FAN and the SET TEMP.
tons, press the RESET button.
3. Press the SET TEMP.
the indoor unit. By selecting the appropriate custom code, the communication between the in-
door unit and the wireless remote controller become possible.
4. For confirming the custom code, press the TIMER MODE button to send the code to the indoor
unit.
5. Press the MODE button to enter the function setting mode.
6. Select the function number by pressing the
Each time the MODE button is pressed, it switches between the left digit and the right digit.
8-2. Indoor unit (setting by wireless remote controller)
FAN
SET TEMP. ( )
RESET
or buttons to select the custom code that matches the setting with
Custom code
( - - - )
The initial setting is " "
or the
- 264 -
Function setting
mode display
2 short beeps
button.
Change digit
but-
8. Function settings