Thermal Probes - ABB GPS4827 User Manual

Thermal Probe
Without thermal probes, many of the controller's battery management features will not function, or produce erroneous
results. Some features requiring thermal inputs are:
Slope Thermal Compensation
•
• Reserve Time Prediction
• High Temperature Alarm
• Ambient High and Low Temperature Alarms
• High Temperature Disconnect
Step Action
The controller supports a number of thermal probe inputs. The type of probe used determines where it is
connected on the controller. Detailed thermal probe and battery management information may be found in
NOTE:
the User's Guide for Millennium II Controller Advanced Features manual.
The following table shows the type of probe and connector location on the Millennium:
Type of Probe
10/30K
210E Thermal Probe Mux
1 Wire Temperature Monitoring
Devices
1.
Terminal Block Interface for 3
additional 10k probes or 210E
connection
Page 42
© Copyright 2021 ABB. All rights reserved.
Ordering Code
Controller Connection Location
P3
P3
P7
TB2
Pin Description
1 Probe 2
2 Probe 2 RTN
3 Probe 3
4 Probe 3 RTN
5 Probe 4
6 Probe 4 RTN