Controller Connections - ABB GPS4827 User Manual

Infinity power system

Hide thumbs Also See for GPS4827:

Table of Contents

Controller Connections

Interface Reference

P13

P14

P15

P201

P202

P205

TB1

TB2

J10

Page 37

Figure 9-2: Millennium II Controller Connections

Description

Connectorized interface for large parallel format 8x40 LCD assembly

10/100 Base-T LAN/Ethernet interface

Connectorized interface for 10K/30K thermistor probe options or 210E

Connectorized input for input power, monitoring of two shunts, plant sense voltage, and Major

Fuse alarm (Same connection as on the Millennium)

RJ45 receptacle for ground referenced Auxiliary RS485 circuit and One-Wire temperature

monitoring devices

BSL1-4 circuit pack Interface connector for Input/Output to controller

RJ45 receptacle for isolated RS485 system component monitoring and control of rectifiers,

converters, low voltage disconnect contactors, and bay level alarm inputs (Serial Rectifier

bus)

Factory test connector (not used in the field)

Connectorized interface for future smaller serial format LCD

Connectorized interface for optional Modem

Ground referenced DB-9 for local RS232 serial port

Option board connector

Terminal block interface for RS232/RS485 Auxiliary port and Remote Peripheral Module (RPM)

connections

Terminal block interface for three additional 10K thermistor probe or 210E connection options

USB interface (reserved for future use)

Table 9-A: Millennium II Interface Reference

Table of Contents