Glion Dolly XL User Manual page 24

arrow icons on both sides of the connector and firmly connect them. Make sure it is
fully seated and tight.
There is another smaller connector along this wiring near the neck. That is for the
charging port. If the scooter battery is not taking charges, this connector may need to
be checked. If it is loose, you can see the color in between the two sides of the
connector. Just align the arrows from both sides and plug them firmly together until
tight.
B: Upper handlebar connectors: There are five connectors behind the upper headlight.
If any of them are loose, you can see the inside color between two ends of the
connectors. Make sure they are all tightly connected.
Problem: The Scooter braking is soft.
Possible causes/solutions:
Braking cable wire needs to be adjusted. Solution: Tighten the braking cable for front wheel or
rear wheel by turning the wire bolt clockwise as shown in below pictures.
Front & rear braking cable adjustment
Problem: The Scooter Operates Intermittently.
Possible causes/solutions:
23