Operating Your Glion Electric Scooter - Glion Dolly XL User Manual

Hide thumbs

Table Of Contents

Table of Contents

6. Kickstand: The kickstand (H) is located towards the rear wheel on the left side of the

standing board. Be sure to always lift the kickstand before beginning operation of the

scooter.

7. Dolly Feature. The Dolly Feature includes the wheelies located behind the rear wheel and

the retractable handle located at the front of the standing board. The dolly handle has two

positions. Position 1: The closed position. Here, the dolly handle is fully retracted into the

board and locked into place so that it cannot be extended without first pressing the center

button. Position 2: The dolly handle is extended. This position is for rolling the folded

scooter behind or next to you. The wheelies allow the scooter to roll by your side and also

to stand vertically with the wheelies and the T-bar as the base. See Dolly Features on later

pages for further details.

WARNING: For your safety and for the safety of others, please

take the time to practice accelerating, braking and familiarize

yourself with the scooter's braking distance in an open and safe

area before taking your scooter out into the general environment. IT IS

YOUR RESPONSIBILITY TO MAINTAIN CONTROL OF YOUR SCOOTER AT

ALL TIMES!

Getting Ready:

1. Fully charge the battery. For safety reasons, the battery is only 80% charged when

shipped from the factory (See Page 16 Battery Charging Instructions Below).

2. Choose a controlled environment away from vehicles, obstacles, and other hazards for

riding.

Even if you have experience with motorized scooters, vehicles, bicycles,

etc., you must familiarize yourself with the function, handling, braking distance,

performance, and safety of this scooter in a safe and controlled environment.

3. Always check and obey all local laws and regulations. Your insurance policies may or

may not provide coverage for accidents involving the use of this motorized scooter.

To determine if coverage is provided, check with your insurance company or agent.

Do not assume your existing insurance policies provide coverage.

4. Unfold the scooter (See Unfolding Instructions above).

5. Adjust the handlebar to height of your choosing.

6. Raise the kickstand.

7. Complete a final roadworthiness safety check before operation.

a. Make sure folding mechanism, handlebar height, dolly handle and handlebar

quick release, wheel lug nuts, other nuts, bolts, fasteners, etc., are secure.

b. Inspect the frame, fork and handlebars for cracks or broken connections.

8. IF RIDING YOUR ELECTRIC SCOOTER FOR THE FIRST TIME, FAMILIARIZE YOURSELF

WITH ITS MOVEMENTS AND BALANCING ON IT BY MANUALLY OPERATING IT WITH

THE POWER TURNED OFF.

CONTROLLED ENVIRONMENT, ON A FLAT SURFACE, FACING FORWARD, WITH BOTH

HANDS SECURELY ON THE HANDLEBAR GRIPS, PLACE ONE FOOT TOWARDS THE

FRONT OF THE STANDING BOARD AND THE OTHER FOOT ON THE GROUND. USE THE

GROUND LEG TO MANUALLY PUSH OR KICK THE SCOOTER FORWARD. ONCE YOU

GAIN SOME SPEED, GENTLY PLACE THE GROUND FOOT ON THE STANDING BOARD

BEHIND YOUR FRONT FOOT. REPEAT THE SAME MOVEMENTS ONCE THE SCOOTER

SLOWS DOWN TO KEEP IT PROPELLED FORWARD. RIDING THE SCOOTER WITHOUT

THE POWER ENGAGED DOES NOT DAMAGE IT.

WITH THE POWER TURNED ON UNTIL YOU FEEL CONFIDENT MANUALLY