Table of Contents
Advertisement
Device Overview
Click Return
Control,Backup, Power On, Factory Setting.
Overview: Show Device Info including current
temperature and Mac ,Main board info, Input modules
info and output module info
IP:Support auto/manual setting. Show IP Address,
Netmask, Gateway
Fan Control: Support auto/manual setting.
Fan Speed: 0-100
Backup: You can choose to turn on/off backup.
Backup Mode: Input Backup, Preset Backup
Power on: Set power-on time.
Factory Setting
Remove EDID: Clear the previous EDID parameter.
Save IP: No change of IP after reset.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
, there are overview, IP, Fan
support@rgblink.com
Note:IP default:192.168.0.100.After IP address is
changed,re-plug the power and restart the
|
www.rgblink.com
18 / 28
Advertisement
Table of Contents
