Table of Contents
Advertisement
Authorization Setting
Click
to open up the authorization entry.
Management
Click Management
New:Add new USER NAME and PASSWORD
Edit: Edit user name and password already built.
Delete:Delete user name and password already built.
Permission: functions on this XPOSE 2.0 on this
computer that the users are allowed to operate.
Click the green block to remove the function not to be
permitted.
Slave Unit
Click Slave Unit
Slave Unit is to control multiple devices simultaneously,
which are connected to same network. ("In the same
network" means the the the third section in the IP address
digits are the same ) XPOSE do operation on one device,
same operation synchronized to other devices. For example,
there is another devices linked to the same network, one
with IP IP192.168.0.45.
1. Set device numbers；
2. Select the IP of the device in the drop-down menu for
Device IP
3. click ON,the tow device are connected when the red
pot
turns to be green one
4. click OFF to disconnect, it could not control two device
at the same time.
Topology Diagram
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
.
support@rgblink.com
|
www.rgblink.com
14 / 28
Advertisement
Table of Contents
