Introduction; Support; System Description; Product Description - Husqvarna AUTOMOWER 450X Operator's Manual

Serial number:
Product number:
PIN code:
The serial number and the product number are on the product rating plate and on the product carton.
• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and
the date of purchase to register your product.

2.1 Support

For support about the product, speak to your Husqvarna
servicing dealer.

2.2 System description

The system contains a robotic lawn mower, a charging
station and a reference station. The robotic lawn mower
and reference station uses the technology with satellite
signals to position the robotic lawn mower correctly,
this means that boundary wires are not necessary. The
reference station is stationary and sends correction data
to the robotic lawn mower to get an accurate position
of the robotic lawn mower. The virtual work area for the
product is made in the Automower
product is operated and waypoints are added to make a
System overview on page 7 .
map in the app. Refer to

2.3 Product description

Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
6 .
The product is a robotic lawn mower. The product has
a battery power source and cuts grass automatically. It
continuously alternates between mowing and charging.
The movement pattern of the product can be set to
random or systematic. The virtual boundary specifies
the work area where the product is allowed to operate.
The satellite receiver in the product senses when it
is approaching the virtual boundary. When the product
hits an obstacle or approaches the virtual boundary the
product selects a new direction.

6 - Introduction

2 Introduction
The operator selects the operation settings in the
Automower
and possible operation settings, and the operation mode
of the product.
2.3.1 Mowing technique
The frequent cutting technique improves the grass
quality and decreases the use of fertilizers. Collection
of grass is not necessary.
2.3.2 Find the charging station
The product operates until the battery state of charge
is low or until the work area is cut, then the product
starts to go to the charging station. The product uses
® Connect app. The
EPOS guidance with satellite signals to find a path to the
charging station. This decreases the wear on the lawn
and the time to find the charging station.
2.3.3 Connectivity
Automower
install the product and to select the operation settings
Support on page
of the product. Refer to
14 .
®
Connect app. The app shows the selected
® Connect is an app that you can use to
Automower ® Connect on page
1970 - 001 - 10.10.2022