Advertisement
EAI-I130 User Manual
The system supports one M.2 M-Key module card for additional memory storage. Please follow the steps for
installation.
1. Power off the system, turn the system around,
and open the bottom chassis cover.
2. Locate the M.2 M-Key slot on the motherboard.
3. Next, thermal pad placement. Remove the
protective film on the Thermal Pad (included in
accessory pack) and gently place on the mother
board. The thermal pad needs to be underneath
the module card.
4. Align the notch of the M.2 storage module card
with the socket key in the pin slot.
5. Insert the M.2 module card pins at 30 degrees
into the socket until it is fully seated.
6. Push down on the module card and secure it
with one screw.
25
Notch
Advertisement
