Table of Contents
Advertisement
24
Descaling procedure
4
4 Disassemble all parts and clean them under the tap.
5
5 Reassemble the internal cappuccinatore.
6
6 To place back the internal cappuccinatore, put it in upright position and make
sure the holes are aligned with the two tubes on the machine. Then move the
internal cappuccinatore upwards until it locks into place.
7
7 Close the door.
Visit
www.saeco.com/care
Please use Philips descaler only. Under no circumstances should you use a
descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar)
as this may damage the water circuit in your machine and will not dissolve
the limescale properly. Not using the Philips descaler will void your warranty.
Failure to descale the appliance will also void your warranty. You can buy Philips
descaler from your local or online retailer or from authorized service centers.
1 When the machine asks you to descale it, tap the confirmation
1
To start descaling without being prompted by the machine, tap the 'Status'
icon and select 'Descale'.
2
2 Remove the drip tray, the coffee grounds container and the HygieSteam
container, empty them and put them back into place.
3 Remove the water tank and empty it. Then remove the AquaClean filter.
3
4
4 Pour the whole bottle of Philips descaler into the water tank and then fill it
with water up to the CALC CLEAN level. Then place the water tank back into
the machine.
5
5 Place a large container (1.5 l) under the coffee dispensing spout.
for detailed video instructions.
icon to start.
Advertisement
Table of Contents
