Battery - KYMCO MXU700i Manual

Hide thumbs Also See for MXU700i:
Table of Contents

Advertisement

8.20. BATTERY

Your ATV battery is located in a compartment under the front
cover. The battery is sealed, so it is not necessary to check the
electrolyte level or add distilled water. If the battery seems
weak, see your authorized KYMCO dealer for information on
recharging or replacement. If you replace the battery, choose
one that is sealed and equivalent to the original. Be sure to
read and follow all safety precautions indicated on the battery.
Do not attempt to remove the caps from the battery cells
as this may damage the battery.
Although the battery is sealed, it vents explosive gases
and should be handled with appropriate care.
POTENTIAL HAZARD
Allowing open flames or sparks near the battery.
WHAT CAN HAPPEN
Gases may explode and possibly cause injury.
HOW TO AVOID THE HAZARD
Do not allow open flames or sparks near the battery.
NOTE
When the ATV is to be stored for an extended period,
remove the battery from the vehicle and charge it fully.
Then store it in a cool, dry place. If the battery is to be left
on the vehicle, disconnect the negative cable from the
battery terminal.
Battery posts, terminals and related accessories contain
lead and lead compounds. Wash hands after handling.
8-35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents