Right Handlebar Switch - KYMCO MXU700i Manual

4.6. RIGHT HANDLEBAR SWITCH

(1) 2WD/4WD select button and differential lock switch
2WD Mode
4WD Mode
4WD LOCK
4.6.1. 2WD/4WD Select Button
This ATV is equipped with a 2WD/4WD select button, which
permits a choice between the "2WD"and "4WD" drive modes.
Select a drive mode that is suitable for your riding.
The 2WD/4WD select button is located above the throttle lever.
To select the drive mode, push the button to switch to the
desired position.
To check your present drive mode, look at the multifunction
display.
4.6.2. Differential Lock Switch
The Differential lock switch is located above the throttle lever.
The front axle is equipped with a lockable differential that
allows the operator to choose between an open differential or a
closed differential in low traction situations.
If the differential is in lock manner, no matter the vehicle in 2WD
or 4WD mode, the multifunction display should appear 4WD
and LOCK indicator together.
4-21