Related Manuals for activTek PureKooler
Summary of Contents for activTek PureKooler
- Page 1 Owner’s Manual INNOVATIVE AIR TREATMENT SYSTEM Wall Mount Unit with ActivePure® Certified Space Technology ™ CAUTION: READ MANUAL CAREFULLY FOR PROPER PROCEDURES AND OPERATION. 65-00575_VA-00740_0116...
- Page 2 When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Please record the name and phone number of your ActivTek Distributor: Name ______________________________________________________________ Phone _____________________________________________________________ Please record the serial number of your product:...
-
Page 3: Table Of Contents
24/7 protection from indoor air pollution and exposure to a widening range of harmful contaminants. The PureKooler is designed to be discreetly mounted on a rear, interior wall of a commercial walk-in cooler or refrigeration unit. Installation work and electrical wiring must be performed by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. -
Page 4: Specifications
SPECIFICATIONS Dimensions: 14.25 x 9.25 x 5.25 inches Electrical: 110-120V 60Hz .50A (36.2cm x 23.5cm x 13.3cm) Motor: Impedance-Protected Weight: 8.4 lb (3.8 kg) Mechanical: 30 CFM Bulb: Type UV-C, 10 W 14 inches 5 inches 9 inches WARNING WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: •... -
Page 5: Installation
INSTALLATION Installation is only to be performed by a qualified electrician. The PureKooler is designed to be mounted onto a wall. The PureKooler is not a compressor, condensing unit, or evaporation unit. FRONT VIEW BACK VIEW 1. Connect power cable to appropriate 120 VAC electrical power source according to local or national codes. -
Page 6: Service & Maintenance
SERVICE & MAINTENANCE Service should only be performed by a qualified electrician. Make sure power to the unit is OFF. 1. Remove 4 screws from the cover and slide the cover away from unit. See Fig. 1 2. Unplug 4-pin connector from the ActivePure Cell (red &... -
Page 7: Warranty
OR CONSEQUENTIAL DAMAGES time periods: WE SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL, • PureKooler within three (3) years of date of purchase. INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF EXPRESSED OR IMPLIED WARRANTIES, • ActivePure Cell and Lamp within one (1) year from the CONDITIONS, GUARANTEES OR REPRESENTATIONS, date of purchase. - Page 8 Increase the separation between the Development and Manufacturing equipment and receiver. Date: 1/28/2016 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your ActivTek Distributor or an experienced radio/TV technician for help.
Need help?
Do you have a question about the PureKooler and is the answer not in the manual?
Questions and answers