Table of Contents
Advertisement
Various Status info tabs display information about GNSS, GSM, I/O, Maintenance and etc. TAT100 has one user editable pro le, which can be
loaded and saved to the device. After any modi cation of con guration the changes need to be saved to device using Save to device button.
Main buttons o er following functionality:
1.
Load from device – loads con guration from device.
2.
Save to device – saves con guration to device.
3.
Load from le – loads con guration from le.
4.
Save to le – saves con guration to le.
5.
Update rmware – updates rmware on device.
6.
Read records – read records from device.
7.
Reboot device – restarts device.
8.
Reset con guration – sets device con guration to default.
Most important con gurator sections are GPRS – where all your server and GPRS settings can be con gured and Tracking – where data
acquiring parameters can be con gured. More details about TAT100 con guration using Con gurator can be found here.
Important con guration notes
We strongly recommend testing the network connection from device to the server before adjusting
TAT100 con guration to your needs.
Use the following steps to perform this test:
Con gure these parameters: APN, server Domain and server Port
Save con guration to the device by clicking on a Save to device button;
Initiate connection by pressing the Test Connection button
At this point, TAT100 device will create one high-priority record and initiates connection to the server immediately. If connection was not
initiated, it can mean any of the following:
Improperly inserted SIM Card
Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. +370 5 212 7472
Faks. +370 5 276 1380
www.teltonika-iot-group.com
info@teltonika.lt
Advertisement
Table of Contents
