Engineering; Monitoring Functions - Toshiba TOSDIC-CIE DS Instruction Manual

3. Engineering

Monitoring Functions

Station Configuration
When you register OIS(SVR) for station configuration, the following screen is displayed.
Station Name
Redundancy Form
Node Type
: INSTRUCTION
To use redundant configuration of OIS(SVR), the primary side must be odd and the secondary
side even.
Primary OIS(SVR):OIS1(SVR),OIS3(SVR),OIS21(SVR)
Secondary OIS(SVR):OIS2(SVR),OIS4(SVR),OIS22(SVR)
The same node type numbers cannot be specified in OIS-DS and OIS(SVR).
Example: Both "OIS11" and "OIS11(SVR)" cannot exist at the same time.
Figure 3.1 The Station Configuration Setup Screen
Table 3.1 Station Configuration Setup
OIS-DS
Arbitrary name
Single
OIS1 - OIS22
SVR-DS
Arbitrary name Arbitrary name
Single/Redundant Single/Redundant
SVR1 - SVR2 OIS1 (SVR) - OIS22 (SVR)
3. Engineering
OIS(SVR)
27