1. CONTENT Indicator ×1 2. NOTES AND WARNINGS Operate the indicator in a room where the temperature ranges between +104 -10–40 °C (14–104 °F) and where the relative humidity is below 80%. Potential temperature change shall occur gradually and slowly. Place the scale away from heat Avoid exposing the scale to the influ- Not intended for use within EX zones.
3. PREPARING FOR WORK Place the indicator on the workstation and leave it until it reaches ambient temperature. 3.1. Indicator Temperature Stabilization 1- 8 h Prior to switching the device on let it Connect the indicator to reach room temperature (estimated the mains.
Grounding terminal. Power cord cable gland. USB A connector. USB M12 4P connector. RS232(1) M12 8P connector. Ethernet RJ45 connector. 4OUT M12 8P connector. 4IN M12 8P connector. Platform 1 cable gland. 7. CLEANING AND MAINTENANCE 7.1. Notes and Warnings Prior to cleaning it is necessary For cleaning use only soft cloths made...
7.2. Cleaning Tips • STAINLESS STEEL ELEMENTS, ALUMINUM can be cleaned with a soft cloth slightly moistened with a solution of water and a mild detergent (e.g. soap or dishwashing liquid). • Plastic elements can be cleaned with a soft cloth slightly moistened with a solution of water and a mild detergent (e.g.