SloanLED PosterBOX Slim Installation Manual

PosterBOX
Installation Guide for 701946-6WXLP1 and 701946-5WXLP1
Tools: Required – Measuring tape, wire
strippers, drill, and screwdriver.
1. Clean surface: Clean inside of sign box with
rubbing alcohol and allow to dry. Clean all
mounting surfaces with alcohol for proper
tape adhesion.
3. Fasteners: If desired, modules can be
secured to sides of sign box using #8 (M4)
pan head sheet metal screws or 5/32 in (4
mm) aluminum rivets. For best performance
in a single-sided sign box, mount modules
on returns, flush against rear wall of box. For
a double-sided sign box, mount modules in
center of returns.
Slim
™
Supplies: Required – Wire nuts and IDC
connectors or butt splices with appropriate safety
agency markings. Optional – PLTC cable, cable
ties, #8 (M4) pan head sheet metal screws or
5/32 in (4 mm) aluminum rivets and silicone.
2. Peel and stick: Using provided double stick
tape, mount PosterBOX™ Slim modules to
sides of sign box.
4. Connections: Modules may be connected
in series or parallel. Modules should not be
looped to create a closed circuit. Cap all
unused, exposed wire ends.
WARNING: Check Polarity – All
connections must be RED-TO-RED (+)
and BLACK-TO-BLACK (-). Reverse
polarity connections may damage the
LEDs and will void product warranty.
Retrofits: For retrofits refer to installation
guide 401265-RET. This guide can be found
on the SloanLED website under technical
info or contact your SloanLED Customer
Service Representative.
NOTE: All materials removed must be
disposed of in accordance with applicable
local, state, and federal laws.
Layouts:
Mount PosterBOX™ Slim modules on return
of both long sides of sign box. If brighter
output is desired, mount on all four (4)
sides. It's recommended to test LED density
in a sample cabinet to evaluate brightness,
uniformity, and color. If you have questions
or require assistance in testing, please
contact your SloanLED Customer
Service Representative.
Extra wire for connections: Modules may
be gently pulled apart to release extra wire
for making connections.
PAGE 1 OF 2