Table Of Contents - Kamstrup MULTICAL 403 Installation And User Manual

Contents
1 General information
2 Mounting of temperature sensors
2.1 Short direct sensor (DS)
2.2 Pocket sensor (PL)
2.3 Temperature sensor compatibility with flow sensors
3 Mounting of flow sensor
3.1 Mounting of couplings and short direct sensor in flow sensor
3.2 Flow sensor position
3.3 Installation of MULTICAL® 403 flow sensor
3.4 Installation examples
3.5 Humidity and condensation
4 Mounting the calculator
4.1 Compact mounting
4.2 Wall mounting
4.3 Position of calculator
5 Information codes "INFO"
6 Power supply
6.1 Battery supply
6.2 Mains supply
7 Testing of function
8 Electrical connection
9 Communication modules
9.1 Module overview
9.2 Pulse inputs
9.3 Pulse outputs
9.4 Data Pulse, inputs (In-A, In-B), type HC-003-10
9.5 Data Pulse, outputs (Out-C, Out-D) , type HC-003-11
9.6 Wired M-Bus, inputs (In-A, In-B), type HC-003-20
9.7 Wired M-Bus, outputs (Out-C, Out-D), type HC-003-21
9.8 Wireless M-Bus, inputs (In-A, In-B), 868 MHz, type HC-003-30
9.9 Wireless M-Bus, outputs (Out-C, Out-D), 868 MHz, type HC-003-31
9.10 Analog outputs 2 x 0/4...20 mA, type HC-003-40
9.11 PQT Controller, type HC-003-43
9.12 Low Power Radio, inputs (In-A, In-B), 434 MHz, type HC-003-50
9.13 Low Power Radio GDPR, inputs (In-A, In-B), 434 MHz, type HC-003-51
9.14 LON TP/FT-10, inputs (In-A, In-B), type HC-003-66
9.15 Modbus RTU, inputs (In-A, In-B), type HC-003-67
10 Set-up via front keys
Kamstrup A/S • 55121739_B1_GB_02.2020
MULTICAL® 403
4
5
5
6
6
7
7
8
8
10
10
11
11
11
12
13
14
14
14
15
15
16
16
16
17
17
17
18
18
18
18
19
19
19
19
20
20
21
3