Analog Outputs 2 X 0/4; Pqt Controller, Type Hc-003-43; Low Power Radio, Inputs (In-A, In-B), 434 Mhz, Type Hc-003-50; Low Power Radio Gdpr, Inputs (In-A, In-B), 434 Mhz, Type Hc-003-51 - Kamstrup MULTICAL 403 Installation And User Manual

9.10 Analog outputs 2 x 0/4...20 mA,
type HC-003-40
Analog module with 2 pcs. 0/4..20 mA current
outputs. The current is measured directly
via the 2 sets of output terminals 80-81 and
82-83.
" The module requires that the meter is
mains-supplied.
# The module requires an external power
supply.

9.11 PQT Controller, type HC-003-43

PQT Controller module with output for
regulating a three-point motor-operated valve.
The module is used for regulating power, flow
and temperature in the installation. The motor
valve is connected to terminals 150, 151 and
152. Regulation of the bypass direction of the
motor valve can be made by short-circuiting
the test points Up or Dn.
" The module requires that the meter is
mains-supplied.
# The module requires an external power
supply.
9.12 Low Power Radio, inputs (In-A, In-B),
434 MHz, type HC-003-50
The Low Power Radio module is designed to be
part of Kamstrup's reading system or of a radio
mesh network. The module is available with
either internal or external antenna.
% The module requires a specific
configuration in the meter, see the module
data sheet for details.
9.13 Low Power Radio GDPR, inputs (In-A,
In-B), 434 MHz, type HC-003-51
The Low Power Radio GDPR module is designed
to be part of Kamstrup's reading system or of
a radio mesh network. The module is available
with either internal or external antenna.
% The module requires a specific
configuration in the meter, see the module
data sheet for details.
Kamstrup A/S • 55121739_B1_GB_02.2020
MULTICAL® 403
19