Table of Contents
Advertisement
Surface mounting using the Riser
The Deck mounting kit (A80437) can be used to raise the product from the mounting surface.
The Wall bracket is not required when using the Riser.
Ensure that the chosen location meets the product's location requirements, see
6.1 Selecting
a location
for details.
1. Use the supplied Deck mount riser template (87280) to drill 4 holes in the mounting surface.
Secure the Riser to the mounting surface using 4x supplied fixings.
2. Place the small sealing ring in the groove located on the bottom of the mounting tray.
Advertisement
Table of Contents
Troubleshooting
