Fitting The Instrument; Surface Mounting - Raymarine ST60 Owner's Handbook Manual

18
Each ST60 instrument is supplied with a standard bezel for surface mounting.
Optional mounting kits are available for flush mounting and bracket mounting
the instrument. If you have ordered the flush mounting option a low-profile bezel
and four fixing screws are also provided.

Fitting the instrument

The ST60 Multi instrument can be installed using one of a number of different
mounting options:
• Surface mounting. Gives a profile of approximately 0.95 in (24 mm).
• Flush mounting. Gives a profile of approximately 0.25 in (6 mm).
• Bracket mounting.
The ST60 instruments can also be mounted behind a panel with just the
instrument dial and keys visible.

Surface mounting

To surface mount your ST60 instrument (see the
1. Ensure that:
• The selected location is clean, smooth and flat.
• There is sufficient space behind the selected location to accommodate the
Surface mounting
rear of the instrument and connectors.
ST60 Multi Instrument Owner's Handbook
Surface mounting
4 1 2 1 3
illustration):
5 2 5
D4340-2