Firmware Update - DCU Tecnologic 34157080 User Manual

ENG
CONNECT THE SMARTWATCH WITH YOUR SMARTPHONE:
Please use the Infowear app to connect your smartwatch to your
mobile phone, DO NOT CONNECT THE SMARTWATCH
DIRECTLY TO THE BLUETOOTH OF YOUR MOBILE.
Steps for connection:
Open INFOWEAR APP>> Go to "Device" >> Click "add device"
>> Select HM03 device from the list >> A pairing request
message appears on your smartwatch, click OK>> Complete the
pairing on your phone mobile accepting all the messages that
appear on the screen.
Finally choose the language of your choice in the APP list.
The connection will have finished successfully.
Warnings:
1. To correctly connect the smartwatch and the mobile
phone and to synchronize correctly, you must always
have the Bluetooth of your Smartphone activated.
2. To use all the features of the app, you need to grant
location and notification permissions.
Troubleshoot connection
1. If you cannot pair the smartwatch with your mobile phone,
access the Bluetooth options of your mobile phone, look for
"HM03" in the list of devices and click on disconnect and forget
device.
2. Restart the pairing process with the APP Infowear

FIRMWARE UPDATE:

The APP will prompt you that there is a new firmware version,
you can enter the device interface from the APP and select the
firmware update. Firmware installation requires the smartwatch
battery to be above 60%. If the update fails, just wait for the
smartwatch to restart automatically, and then reconnect to the
APP to perform the update operation.
15 15 15