MacDon R113 Quick Card User Manual page 2

R113 / R116 Qu ic k Ca rd
Side Deflectors
(A) Wide: Deflectors outboard.
(B) Narrow: Deflectors inboard.
F l o a t
Rocks/Ridges/
Loose Ground (100 lb)
1. Loosen (C).
2. Turn (D) CW.
3. Tighten (C).
Tr a n s p o r t
Field Mode
Switch at (A). Light (C) On.
Refer to Operator's Manual.
R113/R116 Rotary Disc Pull-Type Mower Conditioner Quick Card MD #147624
Supplement to R113/R116 Operator's Manual
W i n d r o w
Roll Cond: Move bar (C).
Finger Cond: Move handle (D).
Smooth/Level/
Firm Ground (125–150 lb)
1. Loosen (C).
2. Turn (D) CCW.
3. Tighten (C).
Transport Mode
Switch at (A). Light (C) Off.
Subject to change without notice.
Use this card as a guide only. Refer to your Operator's Manual
for detailed settings and adjustment procedures.
Tips:
• Sharp blades reduce horse power requirements.
• Install cutterbar filler plates in tall, stemmy crops.
• Remove rear filler plate to reduce dirt accumulation in cutterbar.
Finger Baffle
Wide (A): Lower baffle (C)
Narrow (B): Raise Baffle (C)
G r o u n d S p e e d
(A) acres/hr, (B) hectares/hr, (C) kph, (D) mph, (E) 16 ft., (F) 13 ft.
Smooth/Level/Firm Ground:
10 mph (16 kph) and higher until cutting and conditioning quality
are compromised.
Rocks/Ridges/Loose Ground:
Slow to minimize bouncing, uneven stubble and damage to cutter
bar.
D i s c S p e e d
Light/Thin Crop
800 PTO rpm
Roll Baffle
Heavy/Tough Crop
1000 PTO rpm