Installation And Connection; Selecting The Location; Appliance Placement - Atag KU8574K2C Instructions For Use Manual

Selecting the location

WARNING!
Do not place the appliance in a room where the temperature can fall below 5 °C: the appliance
may not work properly or become defective!
Description
Extended temperate
Temperate
Subtropical
Tropical
• In environments with high humidity level, condensate droplets may appear on the appliance's
exterior surfaces.
WARNING!
Install the appliance in a room with an adequate amount of air. There should be at least 1 m
air per every 8 grams of refrigerant. The amount of refrigerant is indicated on the rating plate
inside the appliance.
WARNING!
Do not place the appliance in a room where temperature can drop to below 5°C. In such
environment, the appliance may not operate correctly, or it may become defective.

Appliance placement

In order to safely install the appliance and for the appliance to operate correctly, it is important to
place it onto a surface with adequate load-bearing capacity. If necessary, consult an architect/
structural engineer. The surface should be smooth and level with the floor in the room.
When the appliance is placed on the intended surface, it should be completely level in order to
decrease vibration.
Class Ambient temperature range °C
SN
N
ST
T

Installation and connection

Place the appliance in a dry and well aired
room. The permitted ambient temperature
range for the appliance depends on the
appliance's climate class, which is shown on
the type plate.
+10 to +32
+16 to +32
+16 to +38
+16 to +43
Relative humidity
≤75%
3
of
9