Installation Of The Appliance - Atag KU8574K2C Instructions For Use Manual

Installation of the appliance

If the appliance is not properly installed in a kitchen cabinet, it may tip over.
In order to safely install the appliance, at least two people should carry out the procedure described
below.
Before installation, make sure that the installation niche has the specified installation dimensions.
The installation niche must be horizontally and vertically aligned.
When pushing the appliance into the niche, be careful not to damage the power cord!
If the floor is sensitive, also be careful not to damage the floor covering. The floor has to be horizontal
and flat.
The wall socket must be located outside the area of the back of the appliance and easily accessible
in an emergency.
Ventilation of the appliance takes place through the slots in the base. These must not be covered.
In addition, dust must be regularly cleaned from the slots.
46