Software Update - Atag KU8574K2C Instructions For Use Manual

Operation
Exit SETTINGS MENU
You can exit the SETTINGS MENU with a short press on the settings key
Settings menu ends automatically after 5 minutes without user interaction.
INFORMATION!
If SETTINGS MENU is active, the alarm indications (audio and visual), error notifications and
Charcoal filter notifications are not active, they will be activated as soon as SETTINGS MENU is
closed.
SETTINGS MENU is not activated again when, after failure, power is restored or when appliance
goes back from Appliance-Off to Appliance-On.
In case of power failure, after power is restored, your settinngs will be set to values before power
was disconnected.

Software update

Wine Climate Cabinet's appliance software can be updated (for example improved function updates
or safety relevant updates). This requires Wine Climate Cabinet to be connected to the cloud.
With ConnectLife mobile application you can receive notifications when software updates for the
appliance are available but only when a user account is paired to the appliance. If this is not yet
established, please proceed with the chapter for Operation, Initial Use (this can be done anytime
through SETTINGS menu, not only during initial use).
Update can only be triggered from the mobile app. When new software update is available, mobile
app will send a notification. In the mobile app, a screen will appear with the notification that new
software update is available with direct access to the update process. Please follow the instructions.
Wine Climate Cabinet display shows "Software update" screen while the update is being downloaded
and installed.
During the update process the appliance cannot be used. Make sure the power supply and Wi-Fi
connection are not terminated. The update process may take a while. It is normal if there may be no
response during the update. The update process can take up to 15 minutes. In some cases, if there
is bad network connection, this time can be longer.
INFORMATION!
With the software update also user interface can change, so user manuals may not reflect the
latest changes. For latest version of the user manuals please check your ConnectLife application.
In case the process failed, Wine Climate Cabinet remains on the previous software version and
should operate normal. Try to trigger SW update process again. If the process continues to fail,
contact the service department for further support.
If the appliance is not responding after the update process, please wait for some time. The appliance
might be still in the update process. If there is still no response after multiple hours, contact the
service department for further support.
34
.