Atag KU8574K2C Instructions For Use Manual page 18

Description of the appliance
Wooden shelf on the insulation barrier (6)
18
To remove a shelf from the appliance, fully
extend the telescopic rails (1), and then
vertically lift the shelf (2) to remove it from the
rails. Take care not to damage the door gasket.
The grooves (a) and (b) on the front and back
side of the shelf allow replacing the shelves
onto the rails. To replace a shelf, fully extend
the telescopic rails and, using the grooves,
position the shelf onto the hooks on the front
(c) and the back (d) side of the rails.
Press the shelf (3) all the way back into the
cell. Due to the retention mechanism, the shelf
will remain in the fully retracted position (fully
inside the appliance).
INFORMATION!
Before you start adding bottles to a shelf,
check once more whether the shelf is
correctly placed on the plastic holders. Up
to 8 Bordeaux bottles (0.75 l) can be
placed on each standard wooden bottle
shelf.
INFORMATION!
Higher humidity level inside the appliance
may cause the wooden parts to slightly
bend; this, however, will not affect their
functioning.
The shelf can be partly extended (pulled out
from the appliance). The blocks on the cell
protect the shelf from being fully extended and
pulled out, which could result in the shelf falling
from the appliance.